Baumatic B10 Manuel d'utilisateur télécharger pdf (Page 16)

Installing the appliance

o Cut a hole in the worktop that corresponds with the drawings

shown above.

o IMPORTANT: You must have a gap of at least 25 mm between

the underneath of the appliance and any surface that is below it.

o Carefully turn the hob upside down and place it on a cushioned

mat.

o Apply the sealing strip provided around the edge of the

appliance.

o The protective covering must be removed from both sides.

o Do not leave a gap in the sealing agent or overlap the thickness.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Baumatic B10 Manuel d'utilisateur Page 16