Baumatic BDW15 Manuel d'utilisateur télécharger pdf (Page 12)

o IMPORTANT: You do not need to pour 1 litre of water into

the container when you subsequently fill the water

softener with salt.

Setting the water softener level

It is possible to regulate the amount of salt that the water softener will

release during a wash cycle. The water softener should be set to a

level that is appropriate for the hardness of your water (please refer to

the table below).

To alter the amount of salt that is released by the water softener, you

should:-

o Remove the lower basket and unscrew the cap from the salt

container.

o Locate the ring with an arrow on it that is located on the salt

container. (See figure below).

o When you first receive your appliance, the arrow

will be pointing to the minus symbol. Using the

water hardness chart, you should turn the arrow

to the setting that is appropriate for your water

hardness.

o The “middle” selector position is halfway between the minus and

plus symbols.

o IMPORTANT: If you are using 3 in 1 dishwasher tablets and live

in a medium or hard water area, then you should still fill the

water softener with salt. The water softener arrow should be

turned to the minus setting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Pas de commentaire

Baumatic BDW15 Manuel d'utilisateur Page 12