Baumatic P960SS Pythagora Manuel d'utilisateur télécharger pdf (Page 14)

o The minimum setting is at the end of the anti-clockwise rotation

of the control knob.

o All operation positions must be selected between the maximum

and minimum position.

o Never select a knob position between the maximum and off

position.

o The symbol on the control panel, next to the control knob will

indicate which gas burner it operates.

Automatic ignition with flame failure safety device

The appliance is fitted with a flame failure safety device on each

burner, which is designed to stop the flow of gas to the burner head in

the event of the flame going out.

To ignite a burner:

o Press in the control knob of the burner that you wish to light and

turn it anti-clockwise to the maximum position.

o If you keep the control knob depressed, the automatic ignition

for the burner will operate.

o You should hold down the control knob for 20 seconds after the

flame on the burner has lit.

o After this 20 second interval, turn the control knob to your

required setting between the maximum and minimum setting

symbols.

o To switch the burner off, turn the control knob fully clockwise to

the gas off position.

o In case of power failure, the burners can be lit by carefully using

a match.

Energy saving tips

PANS BURNERS

Minimum

diametre

Maximum

diametre

Wok 220 mm 260 mm

Rapid 180 mm 220 mm

Semi-rapid

120 mm 200 mm

Auxiliary 80 mm 160 mm

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Baumatic P960SS Pythagora Manuel d'utilisateur Page 14