Baumatic BGG32 Manuel d'utilisateur télécharger pdf (Page 14)

position.

The symbol on the control panel, next to the control knob will

he appliance is fitted with a flame failure safety device on each

igned to stop the flow of gas to the burner head in

e event of the flame going out.

aximum position.

o After this 20 second interval, turn the control knob to your

f position.

o In case of power failure, the burners can be lit by carefully using

a match.

o The minimum setting is at the end of the anti-clockwise rotation of

the control knob.

o All operation positions must be selected between the maximum and

minimum

o Never select a knob position between the maximum and off

position.

indicate which gas burner it operates.

Automatic ignition with flame failure safety device

burner, which is des

To ignite a burner:

o Press in the control knob of the burner that you wish to light and

turn it anti-clockwise to the m

o If you keep the control knob depressed, the automatic ignition

for the burner will operate.

o You should hold down the control knob for 20 seconds after the

flame on the burner has lit.

required setting between the maximum and minimum setting

symbols.

o To switch the burner off, turn the control knob fully clockwise to

the gas of

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Baumatic BGG32 Manuel d'utilisateur Page 14