Baumatic HHC600 Manuel d'utilisateur télécharger pdf (Page 16)

o IMPORTANT: You must observe the ventilation requirements

shown in the drawing above. In particular the 20 mm gap

underneath the hob and the 5 mm gap underneath the front

edge of the worktop.

o IMPORTANT: There are ventilation

holes around the outside of the hob.

YOU MUST ensure that these holes are

not blocked by the work top, when you

put the hob into position (see drawing

opposite).

o Carefully turn the hob upside down and

place it on a cushioned mat.

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the aperture. This will make it difficult to remove the hob

from the aperture in future, particularly if it needs to be

serviced.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Baumatic HHC600 Manuel d'utilisateur Page 16