Baumatic BHC925SS Manuel d'utilisateur télécharger pdf (Page 28)

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the cut-out. This will make it difficult to remove the hob

from the aperture in future, particularly if it needs to be

serviced.

(B) Fixing bracket

o Use the fixing bracket that is appropriate for your thickness of

worktop.

o Place a fixing bracket (B) over the hole in each corner of the

underneath of the hob. Then place a screw (C) through the hole

and fixing bracket (B). Tighten the screws partially, so that the

fixing brackets stay in place. IMPORTANT: Do not tighten the

screws fully.

o Carefully turn the hob back over

and then gently lower it into the

aperture hole that you have cut

out.

o On the underneath of the hob,

locate the fixing brackets (B) and

turn them so that they locate on

the underneath of the worktop

and the hob.

o Fully tighten the screws (C) to secure the hob into position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Baumatic BHC925SS Manuel d'utilisateur Page 28