Baumatic BHC310 Manuel d'utilisateur télécharger pdf (Page 25)

o IMPORTANT: There are ventilation

holes around the outside of the hob.

YOU MUST ensure that these holes are

not blocked by the work top, when you

put the hob into position (see drawing

opposite).

o Carefully turn the hob upside down and

place it on a cushioned mat.

o Apply the sealing strip provided around

the edge of the appliance.

o The protective covering must be

removed from both sides.

o Do not leave a gap in the sealing agent

or overlap the thickness.

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the aperture. This will make it difficult to remove the hob

from the aperture in future, particularly if it needs to be

serviced.

o The supplied brackets need to be fitted to the fixing points on

the underside of the hob.

o Place a bracket onto each fixing, ensuring that the outer hole

lines up with the hole on the hob.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Baumatic BHC310 Manuel d'utilisateur Page 25