Baumatic BGG32 Manuel d'utilisateur télécharger pdf (Page 21)

ls All mode

o IMPORTANT: You must have a gap of at least 25 mm between

the underneath of the appliance and any surface that is below it.

o Carefully turn the hob upside down and place it on a cushioned

mat.

o Apply the sealing strip (A) provided around the edge of the

appliance.

o The protective covering must be removed from both sides.

o Do not leave a gap in the sealing agent or overlap the thickness.

o IMPORTANT: Do not use a silicon sealant to seal the appliance

against the aperture. This will make it difficult to remove the hob

from the aperture in future if it needs to be serviced.

(A) Sealing strip

(B) Clamp

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Baumatic BGG32 Manuel d'utilisateur Page 21