Baumatic BRCF1855SL Manuel d'utilisateur télécharger pdf (Page 21)

o Do not defrost the appliance with other electrical devices

(e.g. hair dryer). Do not use sharp metal objects to

remove the ice on the freezer, as this could cause damage

to the refrigerant system.

Installation

IMPORTANT: Before installation and usage read

all the instructions and make sure that the

voltage (V) and the frequency (Hz) indicated on

the rating plate are exactly the same as the

voltage and frequency in your home. The rating

plate can be found on the front left edge of the

inside of the fridge section.

The manufacturer declines all responsibility in the event of the installer

failing to observe all the accident prevention regulations in force,

which are necessary for normal use and the regular operation of the

electric system.

Electrical connection

YOUR FRIDGE FREEZER IS INTENDED FOR FITTED AND

PERMANENT INSTALLATION.

We recommend that the appliance is connected by a

qualified electrician, who is a member of the N.I.C.E.I.C.

and who will comply with the I.E.E. and local regulations.

o Your refrigerator comes supplied with a 13 amp plug fitted. If in

future you need to change the fuse in this plug, then a 13 amp

ASTA approved (BS 1362) fuse must be used.

o The wiring in the mains lead is coloured as follows:

Brown Live

Blue Neutral

Green and yellow Earth

o As the colours of the wires in the appliance’s mains lead may not

correspond with the coloured markings identifying the terminals

in your spur box, please proceed as follows:

The brown wire must be connected to the terminal marked “L”

(live), or coloured red.

The blue wire must be connected to the terminal marked “N”

(neutral), or coloured black.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Baumatic BRCF1855SL Manuel d'utilisateur Page 21